This special laser effect creates fans of laser beams and can be controlled through DMX or runs in stand-alone or music mode.
The BeamBar 10G-532 is a bar with 10 single beam laser outlets, each equipped with a green DPSS laser source >100mW/532nm.
The advantages of the BeamBar 10G-532 are:
- a very bright green
- very affordable
- a very good beam profile
This show laser light provides an analog modulation. It means a better color fading and a much broader color hue. These facts make the Laserworld BeamBar devices ideal for all applications requiring many different color hues and color fadings.
Each laser beam can be individually aligned through a 4-point alignment system, that can easily be accessed from the front - so no opening of the housing is necessary.
The BeamBar 10G-532 can be controlled through 13 DMX channels, so each laser source can be controlled individually. Thus it's possible to create many different chaser, beam or fan effects.
Due to the standard DMX compatibility, the BeamBar 10G-532 can easily be integrated into an existing lighting setup.
This laser projector provides a master-slave-mode. Show lasers of the same series (slave projectors), connected via DMX to a main projector (master projector) project the same patterns like the master projector.
The BeamBar 10G-532 is a great effect for stages, live gigs and nightclubs, as well as for TV Shows and show productions.
|Total Power typical:||1'200mW|
|Minimum output power:||1'000mW|
|Power Green:||10 x 100mW / 532nm|
|Beam Specifications:||ca. 2mm / <1.5mrad|
|Operation Modes:||DMX, Stand-alone, Sound-to-Light, master-slave|
|Accessories:||power cable, manual, key, interlock connector|
|Power Supply:||100V - 250V AC 50/60Hz|
|Dimensions:||39.4 x 6.3 x 3.4 in|