This special laser effect creates fans of laser beams and can be controlled through DMX or runs in stand-alone or music mode.
The BeamBar 10RGB-W is a bar with 10 RGB whitelight beam laser outlets. Each is equipped with 120 mW / 638 nm, 140 mW / 520 nm, 140 mW / 450 nm.
The advantages of the BeamBar 10RGB-W are:
- well-balanced white
- very bright colors
- very affordable
- a very good beam profile
This show laser light provides an analog modulation. It means a better color fading and a much broader color hue. These facts make the Laserworld BeamBar devices ideal for all applications requiring many different color hues and color fadings.
Each laser beam can be individually aligned through a 4-point alignment system, that can easily be accessed from the front - so no opening of the housing is necessary.
The BeamBar 10RGB-W can be controlled through 13 DMX channels, so each laser source can be controlled individually. Thus it's possible to create many different chaser, beam or fan effects.
Due to the standard DMX compatibility, the BeamBar 10RGB can easily be integrated into an existing lighting setup.
This laser projector provides a master-slave-mode. Show lasers of the same series (slave projectors), connected via DMX to a main projector (master projector) project the same patterns like the master projector.
The BeamBar 10RGB-W is a great effect for stages, live gigs and nightclubs, as well as for TV Shows and show productions.
|Total Power typical:||4'400mW|
|Minimum output power:||4'000mW|
|Power Red:||10 x 120 mW / 638 nm|
|Power Green:||10 x 140 mW / 520 nm|
|Power Blue:||10 x 140 mW / 450 nm|
|Beam Specifications:||ca. 3 mm / <1.5 mrad|
|Operation Modes:||DMX, stand-alone, sound-to-light, master-slave|
|Accessories:||Interlock connector, manual, key, Safety Unit|
|Power Supply:||100 V - 250 V AC 50/60 Hz|
|Dimensions:||39.8 x 6.3 x 3.4 in (l x w x h)|