Laserworld CS-2000RGB MKII

Find a dealer or apply to become a dealer

   In stock, ready to ship

Quick Overview

Next Generation of the CS-2000RGB. This unit comes with ultra bright 635nm red and many more new features like a more stable bracket, a new compact housing and the switchable 'Scan Fail Safety'.

Laserworld CS-2000RGB MKII


The new CS-2000RGB MKII is the next generation of the CS-2000RGB and comes with a bright 635nm red, a new compact housing of only  27 x 19 x 16 cm (W/B/H) and less weight. This system now has a more stable bracket which enables the mounting in various ways like on tripods or at the ceiling.

Another high light is the new analogue modulation. This means a better color fading and a much broader color hue. These facts make the Laserworld CS-2000RGB MKII ideal for all applications requiring many different colors and color transitions.

The Laserworld CS-2000RGB is a RGB laser system with analog modulation and a total output power of up to 2'000mW and a minimum output power of 1'600mW.

The red diode laser module with a wavelength of 635nm, the green DPSS laser module with a wavelength of 532nm and the royal-blue diode laser module with a wavelength of 445nm ensure brilliant colors and powerful laser beams. The projector has good beam specifications with a beam diameter of about 3mm and beam divergence of 2.0mrad. At the same time it offers a galvo system with up to 30kpps as well as a scan angle of up to 40°.

The Laserworld CS-2000RGB MKII has a professional ILDA interface. Thus custom or pre-programmed lasershows can be shown by use of a laser control software, e.g. of Phoenix or Pangolin. Through DMX about 200 preset patterns, like waves, tunnels, circles etc. can be projected in different colors and in a various speed. The laser system has an automatic mode, which runs the pre-programmed patterns without assistance. If the music mode is active, the laser system projects according to the sound. For the music mode the sensitivity of the mircophone can easily be set on the rear side of the projector. There is a key switch, an interlock interface and an on-off switch at the rear side of the device. In addition two rotary buttons on the rear side of the device allow adjustement of the pattern size and the sensitivity of the microphone. Furthermore there are dip switches for setting the different operation modes and DMX address.

The Laserworld CS-2000RGB MKII is a powerful whitelight laser systems. This device is well suited for professional applications and it is often used in medium to larger sized clubs and discos as well as for the use in any party location.

Additional Information

Manufacturer Laserworld
Total Power typical: 2'000mW
Minimum output power: 1'600mW
Power Red: 250mW/635nm
Power Green: 250mW/532nm
Power Blue: 1'100mW/445nm
Beam Specifications: ca. 3mm/2mrad, 30kpps @4°
Laser Sources: Diode, DPSS Laser
Laser Class: 4
Operation Modes: auto, music, DMX, ILDA, master-slave
Scanner: galvo system, 30kpps @4°
Scan Angle max.: 40° max.
Basic Patterns: ca. 200 (layers, tunnels, fences, waves, ect.)
Accessories: power cable, manual, ILDA Interlock Connector, 2 x keys (for key switch), Safety Unit pro
Power Supply: 85V - 250V AC
Power Consumption: 120 W
Dimensions: 10.7/7.5/6.3 in
Weight: 10.5 lbs

You may also be interested in the following product(s)

ILDA Cable 32ft - EXT-10B

ILDA Cable 32ft - EXT-10B

PRO-CASE Deluxe for several projector models

PRO-CASE Deluxe for several projector models

Laserworld Showeditor 2015 Set - Laser Show Software incl ShowNET

Laserworld Showeditor 2015 Set - Laser Show Software incl ShowNET