The PIKO RGB 18 has a guaranteed output power of 17'200mW - full color RGB! The RTI PIKO RGB 18 is equipped with red and blue RTI Diode modules (2.5W/658nm, 2.3W/638nm, 6.0W/450nm) and a green Coherent OPSL Taipan module (8W/530nm).
The RTI PIKO devices are very compact laser systems in a sealed housing according to IP 54 and 'Made in Germany'. For that, they are also suitable for mobile applications or the rental business.
Imagine just to take your whole show equipment of e.g. four projectors in your suitcase with you when travelling.
Standard control of this laser light system is through ILDA and it comes with an advanced main board control via browser interface. It is possible to access the configuration settings for color, scanning and other parameters directly through a browser application by connecting to the laser via LAN (W-LAN with suitable access point). With this browser interface it is no longer necessary to physically access the laser projector (that is probably mounted in several meter height). All configurations can be set remotely from any computer (PC, MAC, Linux), tablet or even mobile phone.
These units can optionally be operated through LAN, DMX, SD-card or auto mode as well. Even W-DMXTM and a detachable remote pad are available on request.
|Guaranteed power at aperture:||17'200 mW|
|Power Red:||2'500 mW / 658 nm | 2'300 mW / 638 nm|
|Power Green:||8'000 mW / 530 nm|
|Power Blue:||6'000 mW / 450 nm|
|Beam Specifications (full angle):||ca. 4 mm / <1.0 mrad|
|Laser Sources:||Diode, Coherent Taipan OPSL|
|Operation Modes:||ILDA; optional DMX, Auto, LAN, SD-card, W-DMX|
|Scanner:||CT-6210H incl. RTI RayScan driver: 60kpps@8° ILDA, max. 80° (@35kpps)|
|Scan Angle max.:||80° max.|
|Accessories:||Browser interface (integrated), manual, key, power cable; optional: detachable remote control pad incl. patch cable|
|Power Supply:||AC 110/220 V; 50 Hz-60 Hz|
|Power Consumption:||500 W|