The RTI NANO ROGCB 17 (HD OPSL) show laser projector fulfills highest requirement in terms of brightness, beam divergence and accuracy.
This RTI show laser system is equipped with newly developed Coherent HD OPSL laser modules with TEM00 beam profile (TEM = Transverse electromagnetic mode) . At TEM00 the brightness of the beam spot is homogenously distriburted in a Gaussian curve, so the spot is perfectly round and has no deviances due to wave interferences. The RTI NANO ROGCB 17 has a beam diameter of 2.7mm and an extremely low beam divergence of only ca. 0.5mrad.*
This results in an extremely increase of brightness in comparison to 'conventional' OPSL laser modules and especially in comparison to diode laser sources. The excellent beam specifications make this laser system ideal for graphics and long distance projections, but also for beam effects, which shall be visible from far away.
The RTI NANO ROGCB 17 has a guaranteed output power of 16'000mW - full color ROGCB (5W 639nm red, 2W 590nm orange, 5W 530nm green, 3W 488nm cyan, 2W 460nm blue).
Possible custom configurations: up to 2 sources per color possible! Please ask us!
The compact built laser system has a durable and waterproof housing according to IP65.
The RTI NANO ROGCB 17 comes with CT-6210H scanners as a standard. The scan speed of 60kpps@8° ILDA and a maximum scan angle of 80° allow to run the system at many various events.
All RTI NANO projectors are equipped with ILDA interface for standard computer control and come with an advanced main board control via browser interface. It is possible to access the configuration settings for color, scanning and other parameters directly through a browser application by connecting to the laser via LAN (W-LAN with suitable access point). With this browser interface it is no longer necessary to physically access the laser projector (that is probably mounted in several meter height). All configurations can be set remotely from any computer (PC, MAC, Linux), tablet or even mobile phone.
In addition to that it is possible to order optional control modes, like LAN, DMX, SD-card or auto mode. Even W-DMX and a detachable remote control pad are available on request.
The device can be equipped with CT-6215HB Big Boy Driver scanners and low divergence optics: 60kpps@8°ILDA, max. 80° (@30kpps); beam diameter of ca. 5.5mm and a beam divergence of only 0.3mm.
* depending on the collimators; information based on our recommended standard optics.
|Guaranteed power at aperture:||16'000 mW|
|Power Red:||5'000 mW / 639 nm|
|Power Yellow:||2'000 mW / 590 nm|
|Power Green:||5'000 mW / 530 nm|
|Power Cyan:||3'000 mW / 488 nm (optionally: 2'000 mW / 480 nm)|
|Power Blue:||2'000mW / 460nm|
|Beam Specifications (full angle):||CT-6210H + standard optics: ca. 2.7 mm / 0.5 mrad or optionally CT-6215HP + LD optics: ca. 5.5 mm / 0.3 mrad*|
|Laser Sources:||Coherent Taipan OPSL & HD OPSL, *TEM00|
|Operation Modes:||ILDA; optional DMX, Auto, LAN, SD-card, W-DMX|
|Scanner:||CT-6210H Scanner incl. RTI RayScan driver, 60 kpps@8° ILDA; optional: CT-6215HP Big Boy driver and low divergence optics: 60 kpps@8°ILDA, max 80° (@30 kpps)|
|Scan Angle max.:||80° max. (@35 kpps)|
|Accessories:||Browser interface (integrated), manual, key, power cable, manual beam block panel, Interlock ILDA connector; optional: detachable remote control pad incl. patch cable|
|Power Supply:||85-250 V AC 50/60 Hz|
|Power Consumption:||900 W|